Install and configure CSF (Config Server Firewall) and secure your server.
CSF is a popular security tool for Linux to secure the server with stateful packet inspection firewall (SPI), intrusion detection, a login failure daemon, DDOS protection, and control panel integration.
In this guide you are going to learn how to install and setup CSF and also the essential commands to use the firewall on Ubuntu 20.04.
Update server packages to latest.
sudo apt update
By default Ubuntu 20.04 ships with UFW which is a a basic firewall. Remove UFW using the below command.
sudo apt remove ufw
Install the required dependencies that are used by CSF.
sudo apt install perl zip unzip libwww-perl liblwp-protocol-https-perl
Install Sendmail which is used by CSF for communication.
You can refer this documentation for detailed setup of Sendmail.
sudo apt install sendmail-bin
Now you have all dependencies to install and configure CSF.
Download the latest package using
sudo wget https://download.configserver.com/csf.tgz
Extract the downloaded package.
sudo tar -xzvf csf.tgz
Now install CSF.
sudo sh install.sh
Now you will receive an output as below which indicates the successful installation.
Verify if the required iptables modules are present.
sudo perl /usr/local/csf/bin/csftest.pl
You will receive an output similar to the one below.
RESULT: csf should function on this server
You can check the CSF version using the following command.
sudo csf -v
csf: v14.10 (generic)
*WARNING* TESTING mode is enabled - do not forget to disable it in the configuration
Once the firewall is installed it is configured to run in TESTING mode by default.
To disable TESTING mode you need to make changes to the
sudo nano /etc/csf/csf.conf
Locate the line TESTING = “1”, and change the value to “0”.
TESTING = "0"
Locate the line RESTRICT_SYSLOG = “0”, and change the value to “3”. This means only members of the RESTRICT_SYSLOG_GROUP may access
RESTRICT_SYSLOG = "3"
CTRL+X followed by
ENTER to save and exit the file.
To allow additional ports connections.
Locate the TCP_IN directive and add your ports.
# Allow incoming TCP ports
TCP_IN = "20,21,22,25,53,80,110,143,443,465,587,993,995"
# Allow outgoing TCP ports
TCP_OUT = "20,21,22,25,53,80,110,113,443,587,993,995,3306"
I have added the MYSQL port to connect to a remote server.
Restart CSF after each change.
sudo csf -ra
Essential Commands to Manage CSF
sudo csf -s
sudo csf -f
You must restart CSF each time the configuration file changes.
sudo csf -ra
Allow IP address
-a option to allow IP address.
sudo csf -a 10.0.2.12
Deny IP address
-d option to allow IP address.
sudo csf -d 10.0.2.12
Remove IP from allow list
sudo csf -ar 10.0.2.12
Remove IP from deny list
sudo csf -dr 10.0.2.12
Check if IP is blocked
sudo csf -g IP-ADDRESS
Remove IP from block
sudo css -tr IP-ADDRESS
Allow IP lists
Add your IPs listed on a separate line in the allow file /etc/csf/csf.allow.
Deny IP lists
Add your IPs listed on a separate line in the allow file /etc/csf/csf.deny.
Now you have learned how to secure your server by installing and configuring CSF in Ubuntu 20.04.
Thanks for your time. If you face any problem or any feedback, please leave a comment below.